BILL BOSTON CYCLES

The Hardware Database is a key component of Accufit Designer. The database is used to store dimensions of specific hardware elements for selection during your design sessions. Some data has been pre-populated, but it is suggested that you add data that is specific to your operation. You can add as much data as necessary for each hardware type. You can also edit this data at any time. It is recommended that you not edit data once a hardware element has been used in a design.

It is important to enter the dimensions of the head lugs that you will be using. These dimensions are required even if you are producing lugless or TIG welded frames.

[ Back ] [ Home ] [ Up ] [ Next ] 

Copyright © 2003 BILL BOSTON CYCLES
Last modified: July 09, 2014